WAVLINK wifi print server allows you to share usb printers with multiple users in different ways. In the wired/wireless mode, the product connects to the superior router through the network cable/wifi signal. In stand-alone mode, the product broadcasts a wifi signal, and computers can also share the printer by connecting this signal.
The usb-a port complies with usb2.0, which supports connecting four printers or storage devices via a usb hub. Its palm-size and wide compatibility make the print server suitable for home, warehouse, shop, office, e-commerce, soho, government, educational institutions and any other places that require shared printing capabilities.
1.Connect the power adapter.
2.Connect the printer and network.
3.Follow the Quick Start Guide to configure the printer and network settings on your PC
Please check the Quick Start Guide for more detailed printer and network setup steps.
WLAN LED is on/off - The WiFi is activated/deactivated
LAN LED is on/off - The LAN port is connected/disconnected
BRIDGE LED is on/off - The BRIDGE port is connected/disconnected
SYS LED is on/slow blinking - The printer server has/hasn't connected to the router
SYS LED is fast blinking - The WPS is ON
This USB wireless print server works with most usb printers, such as HP, Canon, Epson, Brother, Sharp, Fuji Xerox, Lenovo, Aurora, Samsung, Konica Minolta, Deli, Toshiba, Kyocera, Zebra, OKI and other printers that support RAW protocol.
A few printers are not supported, such as Canon LBP2900, 2900+, 3000, 7200, HP P1108, HP M403D, Epson 1390. If you are not sure whether your printer supports the RAW protocol, it's recommended to consult our customer service to confirm.
WAVLINK usb wireless print server converts your usb printers into wifi printers, so that all connected computers(connect to the print server directly or through a router) can share these printers, suitable for home, warehouse, shop, office, etc. Note: It is recommended that your computer and the print server be under the same local network.
Supporting web management, this print server provides more convenience by allowing the user to configure, monitor and even reset the print server on a web interface, which eliminates the hassle of technically complex setup of your print server.
Heat ventilation holes are added at the bottom of the usb print server to ensure a good cooling effect and prolong its service life.
1 x Wireless USB Print Server
1 x 5V/1A Power Adapter
1 x Ethernet Cable
1 x Micro USB Cable
1 x Quick Start Guide
- Allow multiple computers to share USB Printers on your local network and print from any computers.
- Compatible with most mainstream USB interface printers.
- Support Samba Service to share USB storage.
- Provide 2 x 10/100Mbps Ports for LAN and Bridge.Can extend your network.
- Support High-Speed USB 2.0 Standard for the Stable Printing Service.
- Support Various Operation Mode:Wired,2.4G Wireless Network and Standalone Mode.
- Support WEB management which is easy to manage your USB Printer Server.
- Support mDNS and SSDP Protocol to find a USB Printer Server easily.
- Support JetDirect(AppSocket)protocol.
- Support WPS button for easy and convenient connection to your wireless network without input password
- Using USB HUB can share up to 4 Printers or 4 Storage devices
WPS function supported, allowing for easy and convenient connection to your wireless network without input password. Press the WPS button for 6s to pair with the router when in Wireless Repeater Mode and press the Reset button for 6s to reset the device.
Specification
Material Type: PC+ABS
Item Weight: 43g/1.5oz
Network Cable Length: 1.1m/3.61ft
Power Adapter Cable Length: 1m/3.28ft
Product Dimensions: 7.5x5.4x1.8cm/2.95x2.13x0.70in
System Requirement: Windows 7/8/10/11/XP, Mac OS
Operation Modes: Wire Mode, Wireless Mode, Standalone Mode
- Please make sure that the print server is connected to a power supply before use.
- This print server does not require an external driver, but you need to download and install the printer's driver from its official website and follow the Quick Start Guide to connect the printer to the computer.
- This print server is compatible with printers that support RAW protocol. If you are not sure whether your printer supports the RAW protocol, please contact our customer service to confirm.
- It is recommended that your computer and the print server be under the same local network.
- In stand-alone mode, you don't need to connect the superior router, but there's no access to the Network at the same time.
- Supports connecting multi-function printers, but does not support the scanning function of it
- This product does not support printing from phones and tablets.
FAQ
- How to log in the management page of the printer server?
Please connect the wifi signal of the wavlink device,then please enter // usb login. link in the browser.Next the login page should appear.The default management page password should be admin.
If the login page does not show up,please try the steps below:
(1)Please disable other network connection and make sure you should connect the wavlink device only.
(2)Try to log in the management page via another browser.
(3)Try to log in the management page by other device like pc or phone.
(4)Try to reset the device by pressing the reset button for 6s and log in the management page again.
- What should I do if the wavlink device often lose connection with the host router in wireless repeater mode?
(1)Try to change the 2.4g channel of the host router.You could choose 1 or 6 or 11 to avoid the crowded channel.
(2)If possible,please try to move the wavlink device closer to the host router.
(3)If possible,please try to configure the wavlink device as wired repeater mode and connect it to the host router via Ethernet cable.
- How to confirm if my printer is compatible with the printer server?
In theory,the printer support raw protocol should work well with our device.
If you are not sure if your printer support raw protocol,please try the steps below to get a test.
(1).Please connect the printer to your pc/laptop via usb cable and share the printer in the lan .
(2).Try to use other pc/laptop in the same lan to add the printer by ip address.
(3).When you are trying to add the printer,please go to setting and use the raw protocol.
Then please try print at other pc,if you could print successful which means the printer should support raw protocol and our device should work well with it.
Tienda: Your Gateway to Amazing Deals! Price Comparison, Stock Check, and Smart Shopping
Navigating the bustling world of e-commerce can be overwhelming, especially when it comes to finding the best deals on your favorite products. Tienda, a comprehensive price comparison and product review website, comes to the rescue! With Tienda, you can easily compare WAVLINK USB Wireless Print Server, WiFi Print Server with 10/100Mbps LAN/Bridge, 480Mbps USB2.0, Support Wired/Wireless/Standalone Modes, Compatible with Windows/Mac and All RAW-supported Printers prices across various stores in your country and make an informed, budget-friendly purchase.
This article introduces you to Tienda\'s Offer Details Page, where you can:
Compare Prices: View a list of stores offering WAVLINK USB Wireless Print Server, WiFi Print Server with 10/100Mbps LAN/Bridge, 480Mbps USB2.0, Support Wired/Wireless/Standalone Modes, Compatible with Windows/Mac and All RAW-supported Printers along with their respective prices. No more browsing through individual store websites to hunt for the lowest price. Tienda simplifies this process for you!
Check Stock Availability: Instantly see if WAVLINK USB Wireless Print Server, WiFi Print Server with 10/100Mbps LAN/Bridge, 480Mbps USB2.0, Support Wired/Wireless/Standalone Modes, Compatible with Windows/Mac and All RAW-supported Printers is in stock at your preferred store. No more surprises of your desired item being out of stock at checkout.
Discover Similar Offers: Explore similar products to WAVLINK USB Wireless Print Server, WiFi Print Server with 10/100Mbps LAN/Bridge, 480Mbps USB2.0, Support Wired/Wireless/Standalone Modes, Compatible with Windows/Mac and All RAW-supported Printers from other stores. You might find an option with similar features at a more attractive price.
Access Product Details: Click on any store to visit their website and view detailed product descriptions, high-quality images, and other specifications.
Why Tienda is Your Top Choice for Finding Deals
Comprehensiveness: Tienda partners with a wide range of online stores to ensure you don\'t miss any exceptional deals.
Constant Updates: The Tienda team regularly refreshes the offers list to keep you up-to-date with the latest discounts and special sales.
User-Friendly Interface: Tienda\'s interface is simple and intuitive, allowing you to effortlessly find the products and offers you\'re looking for.
Free to Use: Tienda is completely free to use! No more extra expenses for finding the best prices.
How to Use Tienda\'s Offer Details Page
Visit the Tienda website.
Search for the product you\'re interested in.
Click on the desired offer from the search results list.
On the Offer Details Page, you\'ll see a list of stores selling the product along with their prices and stock availability.
Click on your preferred store to visit their website and complete your purchase.
Experience Smart Shopping with Tienda!
Imagine you\'re looking to buy a WAVLINK USB Wireless Print Server, WiFi Print Server with 10/100Mbps LAN/Bridge, 480Mbps USB2.0, Support Wired/Wireless/Standalone Modes, Compatible with Windows/Mac and All RAW-supported Printers. With Tienda, you can effortlessly compare prices across different stores, check stock availability, and ultimately make a confident purchase at the best price. Tienda helps you save time, money, and make smart shopping decisions.
Step into the world of amazing deals with Tienda today!
